Shur-Flex&#153 Conversion Kit w/Offset Pinless Retainers – 54″

$273.55

Shur-Flex&#153 Conversion Kit w/Offset Pinless Retainers – 54″

Compare
SKU: 1116242 Category:

Description

Converts standard crank arm to Shur-Flexâ„¢ configuration. Adds knuckle so arm can pivot and fold up for storage. Stores on the side (with 4 offset pinless retainers) to avoid rear doors and gates. Handle of Gatorshield tubing for corrosion resistance. 54″ extension length.

INCLUDED IN KIT:

2 – 1700526 Wire Lock Pins – 3/8″ x 2-1/2″ (Qty. 5)

3 – 1101924 Lock Tube – 5-1/2″ (Qty. 1)

4 – 1700443 Spring Pin – 3/8″ x 2″(Qty. 1)

5 – 1105050 Shur-Flexâ„¢ Upper Crank Extension – 54″ (Qty. 1)

6 – 1701118 Spring Pin – 1/4″ x 1-3/16″(Qty. 1)

9 – 1102691 Lower Extension – 20″ (Qty. 1)

10 – 1700418 Centerlock Hex Nut – 3/8″ (Qty. 1)

11 – 1700369 Hex Head Cap Screw – 3/8″ x 1-3/4″ (Qty. 1)

13 – 1701930 Offset J-Hook Crank Retainer (Qty. 4)

14 – 1100574 Cables w/#5 Interlock Snap (Qty. 4)

15 – 1700400 Self-Tapping Screw – 3/8″ x 1″ (Qty. 8)

16 – 1700434 Lock Washer – 3/8″ (Qty. 8)

17 – 1700407 Hex Nut – 3/8″ (Qty. 8)

18 – 1114599 Offset Pinless Crank Retainer Base Plate (Qty. 4)

19 – 1703133 Clevis Pin – 5/16″ x 1-3/4″ (Qty. 4)

20 – 1703134 Tension Spring (Qty. 4)

21 – 1704380 Bowtie Cotter Pin – 1-3/8″ (Qty. 4)

22 – 1700427 Flat Washer – 1/4″ (Qty. 4)

23 – 1114600 Offset Pinless Crank Retainer Lock (Qty. 4)

 

NOT INCLUDED IN KIT:

1, 7, 8, 12, 12a, 24

 

Additional information

Weight 20 lbs
Dimensions 60 × 5 × 5 in