Rear Cable Return Kit w/Roll Tube Ext. – For 2″ Roll Tube

$228.35

Default

Compare
SKU: 1112064 Category:

Description

Uses a non-stretch cable, steel tension spring and roll tube extension. Installs on rear of trailer. (For reverse roll systems, install on front of trailer.)

FOR 2″ ROLL TUBES

INCLUDED IN KIT:

1 – 1702672 Hex Head Cap Screw – 1/4″ x 2-1/4″ (Qty. 1) 
2 – 1702654 Machine Screw – 1″ (Qty. 4)
3 – 1701543 Nylon Lock Hex Nut – 1/4″ (Qty. 1)
4 – 1700400 Self-Tapping Screw – 3/8″ x 1″ (Qty. 3)
5 – 1114728 Universal Cable Return Housing (Qty. 1)
6 – 1115014 Spacer Washer – 1-5/8″ (Qty. 1)
7 – 1700434 Lock Washer – 3/8″ (Qty. 3)
8 – 1700407 Hex Nut – 3/8″ (Qty. 3)
10 – 1115206 Velcro Hook – 1″ x 4″ (Qty. 1)
12 – 1114582 Cable w/Return Strap (Qty. 1)
13 – 1114691 Front Retainer Plate (Qty. 2)
14 – 1703006 Pulley – 1/16″ Cable Groove (Qty. 5)
15 – 1111056 Plastic Spacer – 3/8″ Thick (Qty. 4)
16 – 1702653 Machine Screw Nut (Qty.7)
17 – 1112997 Rope Block Retainer Plate (Qty. 2)
18 – 1111054 Flat Washer (Qty. 2)
19 – 1702656 Machine Screw – 1-1/2″ (Qty. 2)
20 – 1702655 Machine Screw – 1-1/4″ (Qty. 1)
21 – 1117496 Roll Tube Swaged Extension – 2″ x 4′ (Qty. 1)
22 – 1111808 End Plug/Cable Retainer w/Screw (Qty. 1)
23 – 1110913 Rear Retainer Plate (Qty. 3)

 

NOT INCLUDED IN KIT:

9, 11, 24, 25, 26, 27, 28, 29, 30, 31, 32

 

NOTE: For reverse roll systems, the rear return should be used on the front of the trailer and the front return should be used on the rear of the trailer.

 

Additional information

Weight 13.63 lbs
Dimensions 102 × 8 × 8 in