Description
Uses a non-stretch cable and steel tension spring. Installs on rear of trailer. (For reverse roll systems, install on front of trailer.)
INCLUDED IN KIT – FOR 2″ ROLL TUBES:
1 – 1702672 Hex Head Cap Screw – 1/4″ x 2-1/4″ (Qty. 1)
2 – 1702654 Machine Screw – 1″ (Qty. 4)
3 – 1701543 Nylon Lock Hex Nut – 1/4″ (Qty. 1)
4 – 1700400 Self-Tapping Screw – 3/8″ x 1″ (Qty. 3)
5 – 1114728 Universal Cable Return Housing (Qty.1)
6 – 1115014 Spacer Washer – 1-5/8″ (Qty. 1)
7 – 1700434 Lock Washer – 3/8″ (Qty. 3)
8 – 1700407 Hex Nut – 3/8″ (Qty. 3)
10 – 1115206 Velcro Hook – 1″ x 4″ (Qty.1)
11 – 1702657 Extension Spring (Qty. 1)
12 – 1114582 Cable w/Return Strap (Qty.1)
13 – 1114691 Front Retainer Plate (Qty. 2)
14 – 1703006 Pulley – 1/16″ Cable Groove (Qty. 5)
15 – 1111056 Plastic Spacer – 3/8″ Thick (Qty. 4)
16 – 1702653 Machine Screw Nut (Qty. 7)
17 – 1112997 Rope Block Retainer Plate (Qty. 2)
18 – 1111054 Flat Washer (Qty. 1)
19 – 1702656 Machine Screw – 1-1/2″ (Qty. 2)
20 – 1702655 Machine Screw – 1-1/4″ (Qty. 1)
23 – 1110913 Rear Retainer Plate (Qty. 3)
NOT INCLUDED IN KIT:
9, 21, 22, 24, 25, 26, 27, 28, 29, 30, 31, 32
NOTE: For reverse roll systems, the rear return should be used on the front of the trailer and the front return should be used on the rear of the trailer.
