ROLL-TITE IS NOW SHURTITE™ - A SHUR-CO® BRAND!
Find a Dealer Near You!
To order call 1-800-265-0823. Click here for additional ordering information.
SAFE, FAST & LIGHTWEIGHT CUSTOMIZABLE TARPING
SAVES TIME & MONEY:
One-person operation of entire system in minutes.
System opens and closes safely from the ground.
LIGHTWEIGHT & AERODYNAMIC:
Adds just over 1,750 lbs. to a 48-ft. flatbed.
VERSATILE & COMPACT:
Compresses to 8 ft. long, locks to any spot on track.
Dozens of standard configurations for flatbeds, trucks and trailers.
Our in-house engineering staff will design to meet your needs.
Top-quality aluminum and tarp materials, strict manufacturing standards.
Carries an end-to-end 2-year warranty on parts.
THE PATENTED PNEUMATIC TARP TENSIONING SYSTEM
Field-tested over 2 winters, in temperatures as low as -45° below zero.
OPENS FROM THE FRONT:
No need to open rear of trailer.
FAST & EASY:
No ratchets, straps or cranks to get lost or misplaced.
EASE OF OPERATION:
Headboard controls in a durable weatherproof enclosure.
About the same as winding lock brace or posts and ratchets.
Easy to remove during loading or unloading, if required.
Ties into existing ratchet and post or winding brace tensioning systems.
Pneumatic fuse, temporary manual op tool or remote air supply.
Extruded aluminum track flexes with trailer and resists side impact. An easy-to-replace interior polymer strip cuts down on excessive wear.
Bows & Lifters
Modular high-strength aluminum bows allow quick, easy repairs without welding. Cast aluminum corners with 3-in. radius and anodized aluminum hinged lifters take up minimal space.
Main rolling wheels and horizontal guide wheels rotate on sealed bearings for ease of operation and much less maintenance – no more axle greasing!
Reinforced with 2 vertical posts for added strength, with LED marker lights for improved nighttime visibility. Many optional configurations are available, like man doors, steps, nose cone, etc.
Multipanel tarp of highest-quality 22-oz. high-gloss fabric is reinforced with a second layer at stress points. Available in 40 colors with optional print graphics.
Sliding front lock assembly makes for smooth operation and allows system to be opened from front of trailer for added versatility. Ground operated rear tensioning device or post with ratchets available.
WHEN ORDERING YOUR SHURTITE™ TARPING SYSTEM
All ShurTite™ tarps are custom-made to order and are non-returnable. Correct physical measurements are essential for proper tarp fit. Provide all requested information on a detailed measurement sheet or your order may be delayed. Find trailer detail sheets here.
DO NOT use universal body or trailer sizes; use actual measurements. Body or trailer size and finished tarp size are NOT the same. Choose the detailed measurement sheet that best fits your trailer body. Provide all measurements in inches.
Trailer MUST BE AIRED UP and fifthwheel height set from ground BEFORE measurements are taken and recorded. Width of deck is from outside of rub rail to outside rub rail. Add any special instructions that we will need to know concerning your order.
SHURTITE™ AUTHORIZED DEALERS
Note: All dealers listed as Shur-Tite™ dealers are not necessarily dealers of Shur-Co® specific branded products. To find dealers in your area who sell Shur-Co® specific branded products CLICK HERE.